MICR Scanner Related
Questions
How can I acquire the software or drivers for Digital Check scanner?
How do I feed a check through the check scanner?
How come the LED on my scanner never goes Green?
What do beeps mean after scanning?
How do I get my check scanner repaired?
Answers
Q: How can I acquire the software or drivers for my Digital Check Scanner?
The service provider you purchased the scanner from should have supplied an application or you can get directly the driver from Lead Enterprises website in support menu. Drivers will be installed at time of initialization.
Q: How do I feed a check through the check scanner?
The check cannot be inserted into the scanner until the application allows it. This is indicated by the LED on the front of the scanner changing from Amber to Green. At this point you can insert the document. It must be fed with the MICR line to the right, and inserted squarely against the right edge of the feed tray as indicated by the icon on the scanner insertion tray.
Q: How come the LED on my scanner never goes Green?
The idle state for the scanner is solid Amber, it only changes to Green when the application instructs that a document is to be fed.
Q: What do beeps mean after scanning?
One short beep with the LED flashing Green indicates that the unit was successful in reading the MICR line Three short beeps with the LED flashing Red indicates that the unit was not successful in reading MICR line.
One long beep with the LED flashing Red indicates that an error occurred during processing of the captured image.
One beep during power up sequence is part of self diagnostic test.
Q: How do I get my check scanner repaired?
Your first point of contact to repair your check scanner should be the distributor you purchased the scanner from.
